Vibro-Acoustics’ BulletBrace™ Preassembled Adjustable Cable Restraint Kits are used to restrain non-structural components against seismic, wind, or blast forces.

The Vibro-Acoustics FS series (FS & FST) of floor-mounted free-standing isolators provide vibration isolation for mechanical systems and equipment, and are effective at absorbing both low and high frequency vibrations.

The Vibro-Acoustics NH series of Neoprene Hangers provides vibration isolation for suspended equipment and systems with the potential for high frequency vibration.

The Vibro-Acoustics N & NSN series of vibration pad isolators provides vibration isolation for mechanical and electrical systems and equipment.

Natural gas emergency earthquake shut off valves ranging from 3/4″ to 8″ pipe sizes. Horizontal and vertical installation configurations available.

Vibro-Acoustics’ CSR series of floor-mounted, housed isolators provide vibration isolation for mechanical systems and equipment.

Vibro-Acoustics SRD series of seismically-rated double-deflection neoprene floor mounts provide mid- to high-frequency vibration isolation for floor-mounted equipment mounted on stiff supporting structures.

The Vibro-Acoustics SFS series of seismically-rated floor-mounted free spring isolators provide vibration isolation for mechanical systems and equipment.

Vibro-Acoustics’ Seismic Inline Pump Stands are a series of high-strength steel supports engineered for a wide range of pump and motor size combinations to provide rigid support and restraint for vertical inline pumps. Common applications include all vertical inline pumps serving chilled water, condenser water, heating water, and all other piping systems within and outside building structures.

Vibro-Acoustics’ SCSR series of seismically rated floor mounted restrained isolators provide vibration isolation and restraint for mechanical systems and equipment.

Vibro-Acoustics’ Seismic Equipment Restraint Brackets are a series of standardized steel brackets formed to match most equipment base support frames and predrilled to facilitate securing floor-mounted equipment against seismic forces.

Consulting engineers need practical solutions to noise, vibration and restraint design problems. Contractors need suppliers with project management capability to ensure the lowest installed cost. Owners need quiet buildings – guaranteed.

Vibro-Acoustics’ VCR noise control curb system is usually integral to the solution.

The Vibro-Acoustics SH series of spring hangers. Vibro-Acoustics offers spring hangers that provide general vibration isolation for suspended equipment with no lateral loads or changes in operating weight.

Vibro-Acoustics’ HCS and AHCS thrust restraints provide resistance to horizontal motion due to thrust (for example, air pressure from a fan). Applied in pairs, the Vibro-Acoustics thrust restraints include spring isolation as well as mounting brackets for attachment to the equipment.

Neo+ provides high-frequency vibration isolation for mechanical and electrical equipment such as chillers, transformers, etc. Neo+ has been designed to accommodate the most common anchor bolt sizes at the center and corners of the pad. Anchor mounting holes can be created quickly by simply cutting away a thin connective diaphragm.